Horizontal Split Case

Casing – (Ductile Iron) – Upper and Lower half bolted and dowelled to provide perfect alignment. Upper half casing can be removed for inspection, without disturbing bearings or alignment.

Shaft Sleeve – (Stainless Steel) – Protect the shaft against corrosion and wear, extends through gland for maximum shaft protection.

Impeller – (Bronze) – Enclosed, double suction, Cast in one-piece and balance to minimize the thrust and to ensure longer bearing life. Locked in position by shaft sleeve.

Sealing Housing – (Ductile Iron) – Designed to accept packing with lantern ring. Internally drilled liquid passage in upper-half casing provides lubrication to the packing area.

Shaft – (Steel) – Large – diameter, precision-machined, high strength steel shaft for maximum strength with minimum shaft deflection.

Bearing – (SKF) – High speed capability and low friction bearing.

Wear Ring – (Bronze) – A sacrificial component installed to inhibit fluid from re-circulating back to suction from the discharge.

Lantern Ring – (Stainless Steel) – A perforated hollow ring that receives relatively cool, clean liquid. Distribute uniformly around the shaft to provide lubrication and cooling.

Packing Gland – (Immersion Graphite) – flexibility allows the shaft to run freely as well as leak proof.

Stuffing Box (Gland) – (Bronze) – to press the packing gland into the seal area through bolts.

Plug – (Stainless Steel).

Bearing Housing – (Cast Iron).

Sealing Flush Line – (Stainless Steel) – Line from discharge of the pump and recirculated through the pressure regulating valve into the gland.

Water Slinger – (Oil Resistant Rubber).

Pump Coupling (ASTM No.35).